Products

Key Contacts

Understanding Tank Safety

What's New

Regulations

    HINGED EMERGENCY PRESSURE
    MANHOLE COVER VENT
    Series No. 51600

    series 51600 Protectoseal Series No. 51600 Hinged Emergency Pressure Manhole Cover Vents provide emergency pressure relief for storage tanks that are exposed to an external fire. They are designed to open and provide pressure relief beyond the capacity of the normal breather vents. The Series No. 51600 design allows for higher pressure relief settings than are available on our Series No. 53300 Manhole & Emergency Pressure Cover Vent. The Series No. 51600 Cover Vent does not provide vacuum relief. Vacuum relief must be supplied by an operating vent (See Protectoseal Series No. 830, Series No. 8540H, Series No. 6240, Series No. 16240 or Series No. 18540).

    These vents are mounted on the tank manhole flange. When properly installed, the device provides an effective vapor seal. Under emergency fire conditions, the cover can pivot open on its hinge and provide required relief, preventing damage to the tank due to excessive internal pressure. When tank pressure is reduced, the cover automatically recloses. The hinged design allows the use of a lever principal counterweight so that the pressure settings higher than those available on other dead weight loaded vents of similar size may be achieved. Full open flow capacity and automatic reclosing of vent as tank pressure decreases provide efficient and dependable emergency venting capability while minimizing amount of vapor unnecessarily vented to the atmosphere. The design also allows convenient access through the manhole opening for tank inspection and maintenance.

  • Vents directly to atmosphere

  • Sizes 16" (406.4mm) through 24" (609.6mm)

  • Design permits convenient access

  • Settings achieved by weight loading

  • Minimum / maximum settings

  • Hinged/counterweight design allows for higher pressure settings

  • ProFlow® Sizing/Selection Software

  • Patented, FEP Film "Air-Cushioned Seating"

  • Low-leak pallet design - certified test reports

  • Drawing / dimension chart

  • Conforms with European ATEX Directive 94/9/EC
  • Factory tested and certified



  • Materials of Construction*

    SERIESBASE
    FLANGE/SEAT
    PALLETPALLET
    DIAPHRAGM
    AXC51600Steel/316 S.SSteel. FEP Film
    AXF51600316 S.S.316 S.S. FEP Film

    *Other exotic metals & coatings available.

    Flange mating:Flanged to mate with applicable ANSI 125# FF Flange or API manhole bolting pattern. Other drilling patterns available on special request.

    (For more detailed product information, e-mail us at: info@protectoseal.com.
    Be sure to include the product number and your name and address.)



Copyright ©1996 The Protectoseal Company
225 W. Foster Ave.
Bensenville, IL 60106
Phone: (630) 595-0800
Fax: (630) 595-8059
E-mail: info@protectoseal.com